Plateless created the magnetic number plate kit — tested worldwide, on the Nürburgring, and on everything from 1,000bhp Golf Rs to McLarens. Find out why enthusiasts trust Plateless.
If you've ever pulled into a car meet, lined up on a track day grid, or simply wanted a clean shot of your car without a number plate ruining the front end — you already understand the problem. Number plates are a legal necessity on the road, but off it, they're an eyesore. Plateless was built to solve exactly that.
The Problem With Traditional Number Plates
Standard number plates are screwed, bolted, or glued to your bumper. Taking them off means tools, time, and the very real risk of scratching your paint or leaving adhesive residue behind. For enthusiasts who care about their cars — and care about how they look — that's simply not good enough.
Plateless Magnetic number plates change everything.
What Makes a Magnetic Number Plate Kit Work?
The concept is straightforward: your number plate attaches to your bumper magnetically, so it can be removed in seconds and reattached just as quickly. On the road, it looks and functions exactly like a standard plate. Off the road — at a track day, a show, or a photoshoot — it comes off cleanly, leaving your bumper completely unmarked.
But not all magnetic number plate kits are created equal. The magnet strength, the adhesive, the foam padding, and the quality of the components all determine whether a kit actually works in the real world — or fails the first time it rains.
Plateless: The Original. The Best.
Plateless didn't just enter the magnetic number plate market — we created it. As the first brand to bring a properly engineered magnetic number plate kit to market, we've spent years refining the product based on real-world feedback from real enthusiasts.
Our kits have been tested across the world, in wildly different climates and road conditions — from the wet, cold roads of the UK to scorching summer heat on continental Europe, and yes, even on the Nürburgring. They've been fitted to everything from modified daily drivers to full-blown supercars: 1,000bhp RS3-engined Golf Rs, Porsches, McLarens, and everything in between. If it works on those, it works on yours.
What's Inside a Plateless Kit — And Why Every Detail Matters
We didn't cut corners on a single component. Here's what makes a Plateless kit different:
Epoxy Magnets
We use epoxy-coated magnets rather than bare ferrite or neodymium magnets. Epoxy coating dramatically extends the lifespan of the magnet, protecting it from moisture, road salt, and the general punishment of daily driving. These are built to last.
Soft Foam Pads
The foam pads sit between the magnet and your bumper, acting as a buffer that protects your paintwork from scratches and vibration. When the plate is removed, there's no mark, no residue, no evidence it was ever there. Your bumper looks exactly as it should — perfect.
3M Adhesive
The adhesive that bonds the magnets to the inside of your bumper is 3M — the industry standard for automotive applications. It's the same adhesive used by car manufacturers. It holds firmly in heat, cold, rain, and at motorway speeds, but it's applied in a way that allows clean removal if you ever need it.
Designed to Disappear
This is the detail that matters most: when you remove your Plateless kit, nothing is left on your bumper. No brackets, no screws, no sticky residue. Just clean, uninterrupted bodywork. That's the whole point — a truly plateless look.
In-Depth Fitting Instructions
Every kit comes with detailed fitting guides, and we back that up with online resources and video content to make sure your install is right first time. Fitting a Plateless kit correctly takes around 10 minutes once your bumper is off, and once it's on, you'll wonder why you ever put up with screws.
Built for Track Days
Track days are where Plateless really earns its reputation. Once at the circuit you can remove your number plates before going out on track easily — and with a traditional plate, that means tools, time, and the risk of damage. With Plateless, you pull the plate off in seconds, hand it to your passenger or pop it in the boot, and you're ready to go. Back in the paddock, it goes straight back on for the drive home.
No fuss. No damage. No compromise.
Trusted by Enthusiasts Worldwide
From the UK to Europe, the Middle East to Australia — Plateless kits are on cars across the globe. If it can handle the demands of the Nürburgring — arguably the most demanding race circuit in the world — it can handle anything your daily commute or weekend drive throws at it.
We've been trusted by owners of some of the world's most desirable cars, from track-prepped hot hatches to six-figure supercars. The reason is simple: the product works, every time.
When you're fitting something to a McLaren 720S or a Porsche GT3, you don't want to experiment with an unknown brand. You want the original. You want the one that's been proven.
Frequently Asked Questions
Are magnetic number plates road legal?
Yes, provided your vehicle complies with local regulations and your registration plate is displayed correctly when driving.
Will magnetic number plates damage paint?
High-quality kits like Plateless use foam-backed magnetic pads to help protect paintwork when fitted and maintained correctly.
Can they be used every day?
Yes. Plateless kits are designed for everyday road use as well as shows, photography and track events.
Ready to upgrade your number plate setup? Browse the full Plateless range and find the right kit for your vehicle.
Shop the Plateless Range
- Multi Plate Kit – Plastic Bumper — our best-selling kit, designed for plastic bumpers
- Plateless Duo Kit – Front & Rear — front and rear coverage in one kit
- Multi Plate Show Plate Kit — for show plates and events
- Refresh Kit – Replacement Magnetic Pads — keep your existing kit performing like new
- Shop All Magnetic Number Plate Kits →
Plateless — The Original Magnetic Number Plate Kit.